Genetic integrity

Contact person for Genetic integrity: Jessica Rey, IRRI, Philippines

Contributors to this page: IRRI, Los Baños, Philippines (Jessica Rey, Kenneth McNally, Ruaraidh Sackville Hamilton); Bioversity International, Montpellier (Elizabeth Arnaud); CIMMYT, Mexico (Suketoshi Taba); CIP, Peru (David Tay); ICARDA, Syria (Kenneth Street); ICRISAT, Patancheru, India (Hari D Upadhyaya).

Overview

The magnitude of genetic differences between supposedly duplicate samples is disturbingly high, even unacceptably high. All causes of genetic change are significant contributing factors – genetic drift, unintentional selection, pollen contamination, seed contamination, and mislabelling. In particular, analysis has demonstrated an unexpectedly high rate of mislabelling, a risk that existing “best practices” for genebank management have failed to manage. Similarly, existing best practices to not address the loss of diversity of genes for flowering date noted in the maize dataset.

The greatest changes in genetic composition are apparent between duplicates maintained at different genebanks; the differences are such that “duplicates” at different genebanks should perhaps be described as “equivalents” rather than “duplicates”. Significant changes also occur during management within a genebank.

Thus it is important and urgent to improve both the handling of accessions within genebanks and the transfer of accessions between genebanks, and to develop a strategy and protocols to do so.

General recommendations

• Germplasm handling standards need to be significantly raised in all genebanks through implementation of appropriate quality management systems (linked to activity 1.1 in the risk management section and 2.3.1 regeneration procedures section).
• “Rationalization” among seed genebanks sharing crops in common, in the sense of eliminating or combining duplicates that have the same historical origin, is strongly deprecated. Eliminating or combining duplicates may only be considered if supported by DNA data demonstrating biological duplication, not only historical duplication. However, the cost of genotyping to demonstrate biological duplication still remains very high compared to the cost of seed conservation. This would be particularly true, if a large number of markers are required to capture minor differences in two seemingly duplicate accessions (in several instances even a phenotypically dissimilar accession (through having the same number) may be difficult to differentiate using markers. Systematic identification and elimination of biological duplicates therefore remains an ineffective, inefficient strategy for species with conventional seed that can be conserved long-term in cold stores.
• Other forms of “Rationalization” among seed genebanks sharing crops in common may be considered, provided they are not affected by the presence of genetic differences between equivalent accessions. For example, responding to seed requests could be rationalized by redirecting them to the most convenient source for the recipient, provided there is no specific reason for preferring the specific samples of equivalent accessions held at other genebanks.
• Eliminating duplicates within and among genebanks holding collections of clonal crops is justified because of the high cost of conservation, but only when supported by rigorous molecular characterization.
• Serious consideration should be given to the development of low-cost “DNA barcoding” technologies and to their incorporation as routine checks during genebank management. For example, ideally:
  • Every new seedlot produced after a cycle of regeneration should be screened and compared against its parent or most original sample, to assure maintenance of genetic integrity. This is important, although it will add to the cost.
  • Every transfer of seed between genebanks should be accompanied by data specifying the DNA barcode of the original seed source, to be verified by the receiving genebank on incorporating the seed into its collection.
• In terms of throughput and cost-effectiveness, SNP chips are now considered the most suitable technology for tracking germplasm and quantifying their genetic integrity.
  • Low density (96 SNP) chips are effective for detecting mislabelling errors.
  • Higher density chips are needed for the other factors contributing to loss of genetic integrity.
• Serious consideration should also be given to other methods to promote accurate germplasm tracking during genebank operations, such as barcoding all genebank operations and/or the use of high-precision GPS to identify plots without relying on plot labels.

Recommendations for clonal crops

Model: Musa

For misclassification

• Using molecular markers combined with microscopic determination of ploidy level, check the classification of every newly received sample before introducing it into the collection.
• Verify before accessions are made available for distribution. DArT could be an appropriate tool, but the cost and the practicalities of DArT markers (in 96-well plates), for the moment, still do not make it appropriate for routine use.
• The new recommendation for Musa is now to test incoming material by SSR markers and ploidy determination.

For mislabelling

• Regularly analyze accessions using SSR or DArT.
• Request recipients of germplasm to provide effective feedback on the comparison of the received material in the field with photos/descriptions of the original sample.
• Every ten years, verify the morphology of the accessions maintained in vitro (medium-term conservation), by growing them on the field. This would thus represent ^1/₁₀^th of the collection each year.

For off-types

• So far, molecular methods have not been effective for identification of off-types, or somaclonal variants.
• Morphological observations are required to detect these.

Thus during management of Musa, there is a need for more regular, specific morphological and molecular characterization to ensure adequate quality control.

Recommendations for seed crops

Existing FAO/IPGRI (1994) recommended standards for genebank management include these recommendations for seed increase:

• Regenerate only when required, either because of a loss of viability below a critical threshold (typically 85%) or because of a reduction in seed stocks below a critical threshold.
• Minimize the frequency of seed increase by ideally producing just enough seed to satisfy all seed requests before they begin to lose viability, so that regeneration will not be necessary until seed viability tests reveal a reduction in viability below 85%.
• Every cycle of seed increase almost inevitably results in some loss of genetic integrity, but we can and should avoid accumulating losses of genetic integrity over multiple generations of seed increase. As a general rule, avoid more than three successive generations.

These standards are supported, but should be more rigorously enforced and operationalized. It is recommended that the following elements of best practices be added:

• If seeds need to be multiplied early because seed stocks have been depleted sooner than 50% of the projected life span of seed in storage, double the plot size to store more seed from the next cycle.
• If seeds need to be multiplied because stocks have been depleted (not because of a loss of viability), then:
  • Keep remnants of the parental seed for future seed increase – do not use them for distribution.
  • For seed distribution, always use the youngest available seed lot of an accession.
  • For seed multiplication, always use the oldest available viable seed lot of an accession.
  • Conduct a final seed multiplication using the oldest seed lot at the moment its viability falls below 85%.

The maize data demonstrate a loss of diversity following regeneration, particularly in genes controlling flowering date; but they revealed no relation between the number of ears saved in the regenerated cycle and loss of genetic integrity among the accessions studied. This suggests that gene-specific selection is more important and random drift less important, (but it exists with inbreeding of the population, and should be preferably known with respect to the numbers of ears saved. However, it is usually assumed that outbreeding maize populations has a minimum level of inbreeding. Thus, a theoretical sampling strategy can still be employed to ensure conservation of the diversity present in the population. Inbred lines may need another study at SNP diversity level at various inbreeding cycles (as maize inbred can diverge in seed stocks maintained at the different seed genebanks and breeding stations) than has previously been supposed. It is concluded that the maize regeneration protocol should be modified to maintain the diversity of flowering dates unchanged.

In chickpea and rice, increases in average heterozygosity, as measured with Arlequin 3.0, were observed following regeneration. The results indicate that the consequences of cross-pollination and seed contamination are greater than have previously been supposed. It is common practice to ignore both factors, for example growing adjacent plots of self-pollinating crops with no control over cross-pollination. The results show this is inappropriate.

In rice it is known that almost all of the limited cross-pollination occurs over very short distances, between adjacent plots. Since 2007, the extent of cross-pollination between rice regeneration plots has been reduced in IRRI by sowing adjacent plots to varieties differing by more than two weeks in flowering date, so that a plot is never releasing pollen at the moment its neighbours have receptive stigmata: it has not been possible to evaluate the consequence of this management change during the current activity. Other methods need to be designed and introduced to reduce seed contamination.

Conclusion

A range of innovations is urgently needed to prevent the rapid losses of genetic integrity noted here. These include the introduction of new technologies such as barcoding, “DNA barcoding” with SNP chips and high-precision GPS. Morphological verification remains essential, both for somaclonal variants or other mutants that are difficult to identify with molecular methods, and for efficiently screening out obvious errors. In addition, we need a thorough re-evaluation of genebank management standards.

References and further reading

FAO/IPGRI. 1994. Genebank standards. Food and Agriculture Organization of the United Nations, Rome and International Plant Genetic Resources Institute, Rome. Available in English, Spanish, French and Arabic.

Hirano R, Jatoi SA, Kawase M, Kikuchi A, Watanabe N. 2009. Consequences of ex situ Conservation on the Genetic Integrity of Germplasm Held at Different Gene Banks: A Case Study of Bread Wheat Collected in Pakistan. Crop Science 49:2160-2166.

Transgene analysis

Contributors to this page: CONABIO, Mexico (Francisca Gasman); IITA, Nigeria (Maria Ayodele); CIMMYT, Mexico (Etienne Duveiller, Huixia Wu, Jonathan Crouch, Monica Mezzalama, Suketoshi Taba, Thomas Payne); Bioversity International, Italy (Ehsan Dulloo); International Seed Federation Representative, Monsanto, Mexico (Juan de la Fuente); CIP, Peru (Marc Ghislain); CIMMYT, Kenya (Stephen Mugo); IRRI, Philippines (Ruaraidh Sackville Hamilton); Danish Seed Health Centre for Developing Countries, Denmark (Jan Torp).

This page shows the latest updates on the development of crop-specific guidelines to maintain the genetic identity of germplasm as received and collected regarding the possible unintentional presence of transgenes.

Here we use the term transgenic organism as synonymous to a living modified organism following the Cartagena Protocol on Biosafety. Transgenic varieties have increasingly taken part of modern agriculture, also in developing countries. Several CGIAR Centres currently have genetically engineered material under development to make available the benefits of modern biotechnology to resource-poor farmers. However, voices of concern have urged us to guarantee the maintenance of the genetic identity of the germplasm collected, received and conserved with particular emphasis on avoidance of the unintentional presence of transgenes.

In this context, it is very important for genebanks to prevent the unintentional introgression of exotic genes, including transgenes, not already present in samples conserved in their collections. Best practices in genebanks should be able to achieve a high degree of probability that an accession maintains its genetic identity over generations.

This activity, aimed at limiting the unintentional presence of exotic genes including transgenes into genebank collections, is in line with agreed CGIAR guiding principles. It includes the creation of a database of field-tested genetically modified (GM) crops worldwide, environmental release status and methods of detection and development of crop-specific approaches to maintain germplasm free from transgenes.

Workshop report

Click to open PDF (0.1 MB)

The information on this page was coordinated by Monica Mezzalama (CIMMYT) and implemented by CGIAR Centres holding crops of relevance [Ruaraidh Hamilton (IRRI, Philippines), Marc Ghislain (CIP, Peru) and Suketoshi Taba (CIMMYT-maize collection)] with the additional participation of external experts (see the full list of contributors at the top of this page). This was implemented in line with the recommendations of the CGIAR Genetic Resources Policy Committee.

A workshop held in Mexico (15-17 August 2007) gathered relevant experts who, on the basis of the “Guiding principles for the development of CGIAR Centres' policies to address the possibility of unintentional presence of transgenes in ex situ collections”, drafted the document “Develop crop-specific guidelines to maintain germplasm genetic identity”.

Guidelines to maintain germplasm genetic identity

The basic operations occurring in a genebank, from the acquisition of a new accession to final storage and distribution, are defined in the figure below. It is understood that for specific crops these operations may differ slightly.

Sequence of procedures in a genebank

Possible risks
A risk regarding transgenes is the occurrence of an unintentional introduction of a transgene or transgenes into a genebank collection during each operation. Indoor/internal (contamination, mixture) and outdoor/external (other released germplasm, experimental germplasm) sources of this risk associated with each operation have been identified and described.

A general schematic description of the guidelines' risk management measures at a non-crop-specific level is shown here.

The establishment of crop-specific regulations was developed in accordance with national and institutional biosafety laws and regulations for maize (prepared by S. Taba), rice (prepared by R. Sackville-Hamilton) and potato (prepared by M. Ghislain) and reviewed and finalized by M. Mezzalama.

Maize Practices and procedures to avoid the unintentional presence of transgenes in maize germplasm accessions at the Wellhausen-Anderson Plant Genetic Resources Center.	Click to open PDF (0.1 MB)
Potato Guidelines for the detection of the unintentional presence of transgenes in potato germplasm accessions at CIP’s genebank.	Click to open PDF (0.1 MB)
Rice Proposed policies to address the possibility of the unintentional presence of transgenes in the T.T. Chang Genetic Resource Centre, IRRI.	Click to open PDF (0.1 MB)

Testing procedures

Laboratory testing for GMO detection is recommended as a management measure, depending on the bank operation involved and on the identification and characterization of the source(s) of risk.

Different levels of testing procedures are suggested according to three levels of risk:

• High:
  
  • Refusing introduction of an accession.
  • Testing all germplasm to achieve the highest level of confidence.
  • Testing using small initial sample size.
• Medium: testing using partial or probabilistic sampling methods to achieve a situation-specific result (depending on crop, source, etc.) at a defined level of confidence.
• Low: no testing, because either no transgenic events are present in the area where the sample was grown or there is no source of risk of gene flow.

Other risk management measures that do not involve testing are described for each operation.

Testing to detect unintentional transgenes

Sample size

The decision on the sample size to be tested should be guided by:

• Statistical indications that can be found in Hernandez-Suarez et al. (2008) and other sources (e.g.,GIPSA, ISTA; see website references).
• The amount of seed available.
• The testing procedures used.

How to test

The decision regarding how to test the material is crop-specific, but it is agreed that DNA-based (rather than protein-based) detection will be essential. It is predicted that in the future, all approved transgenes will have publicly and commercially available markers and detection procedures. Therefore, it is necessary to retrieve and maintain updated information on transgenic constructs and respective detection methods. A website with links to the most accredited external database(s) was prepared. Nevertheless, some of this construct information may be kept confidential and hence may not be public.

When to test

Testing should potentially be carried out at two key stages of genebank operations:

• On new acquisitions, including in situ collections and material originating ex situ, at the point of entry into a genebank.
• On existing accessions before initial use, regeneration and distribution.

Positive results and their publication

A cautious approach should be adopted, respecting the moral integrity of the partners in providing genetic material in good faith, while also recommending full transparency where the provider is aware of the presence of transgenes in the material provided.
Where a positive result is obtained, confidentiality and consultation with the provider in the first instance must be respected in order to obtain all necessary information regarding the material.
Genebank managers should follow the same principles as for the unintentional presence of pathogens and not become a “global GM detection police”.

• Material found positive should usually be destroyed and the provider informed.
• If the material is accepted by the genebank, the center also has a moral obligation to inform the national biosafety authority.

If a sample tests positive: Crisis management responses

• For a new acquisition the following possibilities are suggested:
  • Retest to verify.
  • Destroy or return to the provider.
  • Maintain the sample noting the possible presence of the transgene(s).
  • Scrutinize possible sources of contamination.
  • Enter into a confidential dialogue with the provider (or donating country authority).
  • If the material is accepted into the genebank, national and institutional regulations must be followed, with public (transparent) release of all information.
• For an existing accession the following possibilities are suggested:
  • Retest to verify.
  • Identify the gene constructs.
  • Determine level of presence of the transgenes.
  • Inform past recipients, if the accession has previously been distributed.
  • Inform the provider (without accusing).
  • Inform other genebank holders of the accession (identified through crop registries).
  • Maintenance of the sample will depend on the individual bank: as is, or “cleaned” if deemed necessary. Follow guidelines for recognized transgenic accessions.
  • Try to minimize any institutional damage.
• For an existing accession that has been distributed and is in a commercialized form, the following suggestions are made:
  • Formation of a crisis-management team [(including institutional management, legal advisor, communications expert, biosafety expert, scientist(s)].
  • Use of a crisis management reaction matrix (a tool for PR management) to produce a communication strategy.
  • Prompt (proactive) timing is essential.
  • Issue a global public alert.
  • High transparency will result in fewer negative consequences than secrecy. Transparency should also be maintained during ordinary times by cultivating public media that are informed on the types and aims of GM research at CGIAR Centres, as an “educational” activity that may help ameliorate the impact when an undesirable result must be made public.

GMO-free declaration

GMO-“free” statements cannot be issued for technical reasons, except for clonally propagated crops (at high costs). However, transparency is essential and may require a clear statement of procedures used to ensure that material has a low probability of containing transgenes.

Declarations can be issued within stated thresholds and must include stipulations such as “to the best of our knowledge”.
 

References and further reading

Hernandez-Suarez CM, Montesinos-Lopez O, Crossa J, McLaren G. 2008. Probability models for detecting transgenic plants. Seed Science Research 18:77–89.

Guiding principles for CGIAR Centres' policies to address the possibility of unintentional presence of transgenes in ex situ collections. Available from: http://www.sgrp.cgiar.org/sites/default/files/CGRFA11_Guiding-principles[1].pdf. Date accessed: 22 March 2010.

Booklet of CGIAR Centre Policy Instruments, Guidelines and Statements on Genetic Resources, Biotechnology and Intellectual Property Rights. Statements on Genetic Resources, Biotechnology and Intellectual Property Rights, Version II - Rome, July 2003, 51 pp. Available here.

Interesting websites

The following websites provide descriptions of transgenic events and databases on the events released for each crop in each country; the international biosafety agreement; and technical information on sampling and testing.

AGBIOS

Convention on Biological Diversity

Cartagena Protocol on Biosafety

Grain Inspection, Packers and Stockyards Administration (GIPSA): Homepage - Sampling procedures

GMO ERA Project

International Service for the Acquisition of Agri-biotech Applications (ISAAA)

International Seed Testing Association (ISTA)

Sistema de Información de Organismos Vivos Modificados

OECD BioTrack Product Database

Characterization standards

Contact person for characterization standards: Hari D Upadhyaya, ICRISAT, India

Contributors to this page: ICRISAT, Patancheru, India (Hari D Upadhyaya, Shivali Sharma); Bioversity International, Montpellier (Elizabeth Arnaud); Bioversity International, Rome (Adriana Alercia); CIMMYT, Mexico (Suketoshi Taba); CIP, Peru (David Tay); ICARDA, Syria (Kenneth Street); IRRI, Los Baños, Philippines (Ruaraidh Sackville Hamilton) and crop experts.
External reviewer: Murari Singh.

Introduction

Plant genetic resources cover landraces, obsolete varieties and wild species, and provide basic materials to the crop experts to use genetic variability for the development of high yielding cultivars with a broad genetic base. However, the utilization of these genetic resources depends upon their efficient and adequate characterization and evaluation, which requires efficient characterization standards and appropriate strategies.

Characterization and evaluation document the diversity in descriptive traits which vary with the species. In order to facilitate standardization of information obtained during characterization, Bioversity International has been coordinating the development, publication and update of various plant descriptor lists in close cooperation with crop experts and genebank curators (see also the crop descriptors on the Bioversity website by clicking here). There are descriptor lists developed for more than 90 crops. Guidelines are also available for developing crop descriptor lists. Characterization is also increasingly done using complementary characterization methods to capture the full information on a broad range of traits.

Phenotypic characterization strategies and standards should be reviewed at regular intervals to determine their value and usefulness in characterization. This is best done as a collaborative process with collaborators and crop experts:

• Establish a task force of crop experts for the crop.
• Share existing descriptor lists and guidelines for developing descriptors with the task force.
• Obtain opinions and feedback from the task force members and collaborators on the descriptors and their usefulness and propose changes.
• Modify the descriptors' state and stage of recording data, based upon the responses.

Based on this process, modified descriptor lists were developed by crop experts and are available for chickpea, rice, maize, potato, Musa, pigeonpea, sorghum and sweet sorghum and are open for further discussion.

Analysis of diversity data

Analysis of trait data generated from characterization and evaluation studies is used to understand and use diversity. A large number of distance measures are available for analyzing similarity/dissimilarity among accessions based on different traits representing different types of variables, and the selection of the most appropriate distance measure for each trait is the prerequisite for diversity analysis studies. One of the approaches is to form clusters where accessions between clusters would be more diverse than the accessions within a cluster. The clustering algorithms require a distance/similarity matrix between the accessions which can be calculated depending upon the nature or type of traits such as morphological and agronomic traits and/or molecular markers. For more information click here.

Types of data

A. Morphological traits: Data recorded on morphological traits, such as flower colour, pigmentation, seed colour etc. represent discrete or categorical variables and can be grouped as:
a. Binary: presence or absence of a characteristic.
b. Nominal: colour or shape of a trait.
c. Ordinal: a visual scale arranged to represent the intensity of a trait.

B. Agronomic traits: Data recorded on agronomic traits such as plant height, 100-grain weight, yield per plant, etc. represent continuous variables.

C. Molecular marker: The data on molecular markers is recorded in the following two forms:
a. Binary data: presence or absence of molecular marker bands.
b. Allelic data (i.e. on allele size).

Strategy for data analysis

• Each distance measure has its own properties and assumptions.

• The genetical context and mathematical properties of similarity/dissimilarity measures should be given importance when choosing a measure.

• Different distance measures provided different estimates of mean, minimum and maximum diversity.

• Ward’s method: Useful in clustering accessions for morphological and agronomic traits.

• Different distance measures resulted in different number of clusters for different traits, however, a relatively higher number of accessions tend to cluster together even when different matrices/methods were used.

A Helpdesk is available at http://220.227.242.211:9905/ to facilitate system-wide common procedures for diversity analysis across genebanks. This Helpdesk also serves the genebank community globally by providing basic information on various aspects of diversity analysis, such as selection of appropriate similarity/dissimilarity matrices, cluster analysis, analyzing diversity using individual trait and/or combination of traits.

Suggested analyses for trait types

References and further reading

Cavalli-Sforza LL, Edwards AWF. 1967. Phylogenetic analysis: Models and estimation procedures. American Journal of Human Genetics 19:233–257.

Dice LR. 1945. Measures of the amount of ecologic association between species. Ecology 26:297–302.

Gower JC. 1971. A general coefficient of similarity and some of its properties. Biometrics 27:857-874.

Hair JR, Anderson RE, Tatham RL, Black WC. 1995. Multivariate data analysis with readings. 4th Edition, Prentice Hall, Englewood Cliffs, NJ.

Jaccard P. 1908. Nouvelles recherches sur la distribution florale. Bull. Soc. Vaud. Sci. Nat. 44:223–270.

Malecot G. 1948. Les Mathématiques de l'Hérédite. Masson et Cie, Paris.

Mohammadi SA, Prasanna BM. 2003. Analysis of genetic diversity in crop plants — Salient statistical tools and considerations. Crop Science 43:1235–1248.

Payne RW. 2009.The Guide to GenStat® Release 12, Part 2: Statistics. VSN International, 5 The Waterhouse, Waterhouse Street, Hemel Hempstead, Hertfordshire HP1 1ES, UK.

Reif JC, Melchinger AE, Frisch M. 2005. Genetical and mathematical properties of similarity and dissimilarity coefficients applied in plant breeding and seed bank management. Crop Science 45:1-7.

Rogers JS. 1972. Measures of genetic similarity and genetic distance. p.145–153. In Studies in genetics VII. Publ. 7213. Univ. of Texas, Austin, USA.

Sneath PHA, Sokal RR. 1973. Numerical taxonomy. Freeman, San Francisco, CA, USA.

Ward JH. Jr. 1963. Hierarchical grouping to optimize an objective function. J. Am. Statist. Assoc. 58:236-244.

Upadhyaya HD, Sarma NDRK, Ravishankar CR, Albrecht T, Narasimhudu Y, Singh SK, Varshney SK, Reddy VG, Singh S, Dwivedi SL, Wanyera N, Oduori COA, Mgonja MA, Kisandu DB, Parzies HK, Gowda CLL. 2010. Developing mini core collection in finger millet using multilocation data. Crop Science (Accepted).

Safe Transfer of Germplasm (STOG)

Contact person for Safe transfer of germplasm: Monica Mezzalama, CIMMYT, Mexico

Contributors to this section: CIMMYT, Mexico (Etienne Duveiller, Monica Mezzalama, Eloise Phipps, Thomas Payne, Jesper Norgaard), Independent consultant (Jesse Dubin); CIP, Nairobi, Kenya (Ian Barker); CIP, Lima, Peru (Cecilia Ynouye, Wilmer Perez); IRRI, Los Banos, Philippines (Patria Gonzales, Evangeline Gonzales, Carlos Huelma, Myra Almodiel, Joel Dumlao); ICARDA, Aleppo, Syria (Siham Asaad, Abdulrahman Moukahal); CIAT, Cali, Colombia (Maritza Cuervo, Daniel Debouck, María del Socorro Balcazar, César Augusto Medina, José Luís Ramírez, Josefina Martinez); IITA, Nigeria (Maria Ayodele, Lava Kumar); ILRI, Addis Ababa (Jean Hanson, Janice Proud, Juvy Cantrell); Bioversity, International-Musa Germplasm Transit Centre, Leuven, Belgium (Ines Van den houwe);  ICRISAT, Patancheru, India (RP Thakur, AG Girish, VP Rao).

Compilation of information on Safe Transfer of Germplasm (STOG)

The safe transfer of germplasm is paramount to protect germplasm banks from storage of germplasm contaminated by pests and diseases, and to avoid the dissemination of pests and diseases to countries requesting genetic resources.

The coordination of the safe transfer of germplasm falls under the overall responsibility of CIMMYT. The focal point and coordinator for this activity  is Dr Monica Mezzalama, Head of the Seed Health Laboratory, CIMMYT.  Information on seed propagated crops was compiled under the leadership of CIMMYT, whereas CIP was in charge of compiling information on clonally propagated crops under the leadership of Dr Ian Barker.

The approach taken to produce the information presented herein followed recommendations from participants in workshops held at CIMMYT, Mexico for seed  crops (August 2007) and at CIP, Peru, for clonal crops (November 2007). Three major areas were considered useful to group the information: 1) Germplasm import and export requirements; 2) Technical guidelines for the detection and treatment of pests and pathogens and the safe transfer of germplasm; and 3) Best practices in place in the CGIAR Centres.
The framework for this task focuses on relevant quarantine and undesirable pathogens and pests that need to be checked at the level of the Centres’ Germplasm Health Laboratories. This is to protect germplasm banks and secure the safe transfer of germplasm to countries requesting seed and plant material from CGIAR Centres. 

Organization of information

This section provides information on 15 seed crops and five clonally propagated crops under the mandate of CGIAR germplasm banks. It summarizes information on current practices and guidelines for the safe transfer of germplasm gathered from the seed and crop health laboratories from CGIAR Centres in charge of the different crops.
For each crop, contributors are solely responsible for the content of the information shared under the System-wide Genetic Resources Programme(SGRP) platform. 

Seed crops

For each crop on the left-hand menu, information is given on:

Import and export requirements
Country requirements for importing seed/plant material from CGIAR Centres are provided. It is understood that each country may have different requirements. It is also recognized that requirements to import genetic material to a given country are evolving. Therefore CIMMYT is developing a standard tool that will allow Centres to maintain an updated database of import/export requirements for all crops that will link information on specific pathogens and pests (this database is under development). 

Guidelines for the detection and treatment of relevant pests and diseases
These guidelines provide recent information on pathogens (viruses, bacteria, fungi) and pests (insects, nematodes, weeds). The guidelines include noxious pathogens and pests under quarantine, and undesirable pathogens and pests that may have a broad distribution but that should be avoided to ensure plant and seed vigour, whilst reducing the risk of spread and losses. Therefore the pathogen and species lists are not exhaustive and are limited to relevant pathogen and pests following the framework and rules presented above. The guidelines include information on: importance as a seedborn disease, significance as an economic disease, symptoms, biology, transmission, indexing tools, treatments with key references and links to photographs or other information sites.

Best practices
These pages provide the general procedures in place in the CGIAR Centres to secure the safe transfer of germplasm, including flow charts of germplasm entering and leaving a country and more detailed information on indexing tests in place.

Clonal crops

The following information on clonal crops is provided in the clonal crops subsection:

• Diagnostic methods for determining the health of germplasm of clonal crops.
• Disease lists for banana, cassava, potato, sweet potato and yam.
• Protocol validation for the safe handling of germplasm.
• Guidelines for the detection and treatment of relevant pests and diseases are provided for potato and sweet potato.
   

General information

Seed and plant health laboratories in CGIAR Centres work in close collaboration with phytosanitary authorities in the host country. A directory of key contact addresses in the CGIAR Centres and host countries is provided here.
Quarantine services in each country are the ultimate authority defining pathogens and pests that are part of their regulation to import and export plant material. These phytosanitary services operate under the International Plant Protection Convention (IPPC).

Useful links on phytosanitary aspects are summarized here.

General information on how pathogens and pest names should be used, following standard rules, is provided here.

We recognize that there is need for improvement and further contributions are very welcome. Queries, corrections and additional information or updates can be addressed to the contact persons for STOG. These will help to improve the Knowledge Base over the years and to make the safe transfer of germplasm easier.

References and further reading

CABI. 2007. Crop Protection Compendium, 2007. CD-ROM Edition. Available from: http://www.cabi.org/cpc/. Date accessed: 21 June 2013.